TESERY Tesla Model 3 Fog Light Trim - Carbon Fiber Exterior Mods
Free Shipping
Free standard shipping on orders over $65
Orders are typically shipped within 2 business days.
Free Returns
Reliable After-Sales Service.
Give Your Model 3 the Aggressive Edge It Deserves.
Transform the predictable front end of your Tesla Model 3 (2017-2023) with our genuine carbon fiber fog light trim. This "air knife" inspired overlay instantly adds a wider, track-ready stance and undeniable motorsport aesthetics to your daily drive.
Upgrade Exterior with Tesla Carbon Fiber Accessories
🏁 100% Genuine Carbon Fiber
Say goodbye to cheap ABS plastic and printed vinyl. Crafted from real carbon fiber featuring a flawless 2x2 twill weave, delivering an ultra-lightweight profile and a deep, multi-dimensional texture.
🛡️ Triple-Layer UV Protection
Finished with three coats of premium UV-resistant clear coat. Designed to withstand harsh sunlight, ensuring your exterior mod maintains its pristine look without rapid fading or severe yellowing over time.
🎯 Precision OEM+ Fitment
Molded directly from factory 3D data. This ensures a seamless, flush fit against your original fog light housing. It looks like a factory-installed performance package, not an aftermarket afterthought.
⏱️ 5-Minute Non-Destructive Mod
No drilling, cutting, or bumper removal required. Applies easily using the pre-installed automotive-grade 3M adhesive. Completely reversible, making it a safe choice for leased vehicles.
Product Specifications
| Material | Genuine Carbon Fiber (Dry / Wet process) |
| Available Finishes | Glossy / Matte / Forged Carbon |
| Fitment | Tesla Model 3 2017-2023 (All trims & versions) *Does NOT fit 2024+ Highland |
| In the Box | 2x Carbon Fiber Fog Light Trims, 1x Roll of 3M Tape |
Installation Guide
Achieve a professional result in your own garage by following these simple steps:
- Prep the Surface: Thoroughly clean the fog light area. Remove any dirt, oil, wax, or ceramic coatings using rubbing alcohol. The surface must be 100% dry.
- Test Fit: Before removing the tape liner, place the trim over the fog light to verify the exact alignment and position.
- Heat the Tape (Crucial): For maximum adhesion, use a heat gun or hair dryer to gently warm the 3M tape (do not exceed 104°F / 40°C) right before applying.
- Apply & Press: Avoid touching the adhesive. Align carefully, press firmly into place for 20-30 seconds. Do not wash your car or expose it to rain for 48 hours.
Note: Items are considered used and non-returnable once the adhesive liner is removed. Please test fit first!
Warranty & Care Information
- Carbon Pattern: Real molded carbon fiber is hand-laid. Minor variations in the weave direction are normal characteristics of authentic composite materials and are not manufacturer defects.
- 1-Year UV Warranty: While coated with 3 layers of UV protection, extended exposure to direct, intense sunlight without proper maintenance can degrade any clear coat. Slight yellowing over years of outdoor parking is normal. We highly recommend regularly applying a high-quality UV protectant spray (like 303 Protectant) or a nano-ceramic coating to maximize lifespan.
Frequently Asked Questions (FAQ)
Q: What is the difference between Dry Carbon and Wet Carbon?
Dry Carbon (Pre-preg) is manufactured using carbon cloth pre-impregnated with resin, then cured in an autoclave under high vacuum pressure. This results in an ultra-lightweight, razor-thin piece with a flawless weave—ideal for overlays to ensure a flush fit.
Wet Carbon involves hand-laying the cloth and manually applying liquid resin. It is slightly thicker and heavier, often providing a deep, glossy finish at a more accessible price point. Both are 100% genuine carbon fiber.
Q: Does this fit the 2024 Model 3 (Highland)?
No. This product is exclusively designed for the 2017-2023 Tesla Model 3. The 2024+ Highland refresh features a completely redesigned front bumper without these traditional fog light bezels.
Q: Will these overlays block my sensors or affect Autopilot?
Not at all. Our fog light trims are ultra-thin and precision-cut to completely avoid covering or interfering with any OEM ultrasonic sensors (USS) or cameras. Your Autopilot and parking features will function perfectly.
Q: Is this real carbon fiber or just cheap printed ABS plastic?
These are made of 100% genuine molded carbon fiber featuring a real 2x2 twill weave pattern. They are NOT cheap ABS plastic or water-transferred faux carbon.
Q: How do I ensure the tape doesn't peel off (especially with Ceramic Coating)?
For a permanent bond, the surface must be absolutely clean. If your car has a ceramic coating or wax, you must wipe the installation area with rubbing alcohol first. Crucial step: Gently heat the pre-applied 3M tape with a hair dryer immediately before pressing it onto the bumper.
Q: Are these safe to run through an automatic car wash?
Yes! Once properly installed and allowed to cure for 48 hours in dry conditions, the automotive-grade 3M adhesive creates a permanent bond that easily withstands both touchless and traditional automatic car washes.
